Steps to Make Scary Halloween Masks At Home

Step By Step Guide To Make Scary Halloween Masks At Home

Having unique and Scary Halloween Masks on Halloween Eve is the best thing every person wants to have, as they want to be remembered as the ones who scared the hell out of people with the help of their cool, unique, yet scary look! But what if your cool Halloween masks are DIYed? It can add a personal touch to your masks because you can make the mask according to your face structure, and it will turn out to be the best mask due to the perfect fit. But the question is, how can you make a Halloween mask that would terrify people? Let’s find out what you need and how you can make your scary Halloween masks with passion!

Step 1: Materials That You Will Need

The first step you need to take is gathering all the required material. To purchase the needed material, you can visit Seasonal Halloween Stores or superstores and look for the following things:

• A polystyrene foam head or a cast of your face
• A baseball cap
• Cheesecloth
• Heat gun
• Paints and brushes
• Petroleum jelly
• Ping-pong balls for eyes
• Sculpting Tools
• Thermoplastic or Plaster bandages
• Wed clay
• White glue
• Wig
• Zip ties

Step 2: Sculpt Your Mask

After gathering all the materials, the next step you will need to do is sculpt the mask that you have in your mind. Follow the below-mentioned step-by-step guide to sculpt your desired mask:

• Draw or find an image of the mask that you want to make.
• You can also opt for the re-imagining of the mask that you may find best.
• Now, you need to sculpt the shape of your head. Ensure you know where the eyes, nose, and mouth are in the mask so that you can see, breathe, and eat comfortably after wearing it.

Note:

• If you use a polystyrene foam head, you only need to measure your face and mark the placements on the foam head.
• If you use Wed clay, you must add water to smooth it and make the desired sculpture.

Step 3: Form Thermoplastic or Plaster Bandages to Sculpt Using A Heat Gun

Mold the plastic with your fingers, ensuring it fits all the grooves. If the plastic is too hot, have some cool water nearby to rinse any excess glue.

When shaping the plastic, hold it until it cools to prevent it from springing back out. It may take a few minutes to get the hang of it, but it becomes quick and easy.

Remember to apply petroleum jelly to your sculpture for plaster bandages before starting—Lay short strips over the sculpture, molding them into creases.

Apply one layer, then add a second layer with strips running in the opposite direction once the first layer is dry. Repeat this process a third time for sufficient strength and shape retention.

Step 4: Make the Hat

To make a hat, follow the below-mentioned steps:

• You can use a large tube and nonwoven fabric (another type of thermoplastic, but both will function just as effectively as plaster bandages).
• Now, you must cover the tube with plastic wrap to prevent it from sticking while using a heat gun.
• The next step will be heating the thermoplastic with a heat gun to form wrinkles and shapes.
• After using the heat gun, you can remove the tube from your designed structure and continue to wrap it around to give your hat a proper shape. Also, glue the structure to itself with a heat gun.
• Remove it from the tube, continue wrapping around it, and glue it to itself with a heat gun. If you're using plaster bandages, bond them together.
• Use thermoplastic or bandages to form a flat top and brim.

Also Read: Top Halloween Costume Wigs To Wear For 2024

Step 5: Design the Eyes

To create the eye, go through the following process:

• To design eyes, you will need one ping-pong ball cut in half to make two eyes. You can use the larger side of the ball as your eyes.
• Cover the balls with petroleum jelly so they won’t stick with glue.
• To make the eyes, you will need cheesecloth soaked in glue. Now, use that glue-soaked cloth to cover the ping-pong balls.
• Remember to leave enough cheesecloth to puddle around the sides of the ball so that you will get a flange to glue the eyes to the inside of the mask.
• Now, let the eyes dry thoroughly.
• The next step will be cutting holes from the shape of your mask where your eyes will be placed.
• Fit the eyes to the mask and glue them in the back to give a realistic look.

Step 6: Paint The Mask

Now, this is one of the important steps as it will give your mask the scary look that you may want. Let’s dig into it.

• Start painting your mask with a white base, or you can opt for gesso to give the other colors a flat and even base.
• You can use a thin rope around your hat’s crown. The rope will give your hat extra texture.
• Start by giving shadows and highlights to give your hat a bold look.
• You can opt for darker colors or blood-red shades to give your mask details a deadly look and achieve the perfect design you imagined.
• Now, after providing the details outside the mask, it’s time to paint the interior of your hat. Choose a black color.

Step 7: Attach Mask, Wig and Hat

After painting the mask, it’s time to assemble the mask with a wig and hat. Let’s find out how can you do it:

• If you have a baseball cap, you must cut the brim off it.
• Now, you can use zip ties to attach your chosen wig to the mask and cap.
• After attaching the wig, now it’s time to place the hat.
• Try the mask on to decide the most balanced place where your hat will be placed without hassle.
• After deciding on a place, place the hat on it and attach it using zip ties.
• Now, it’s time to style your wig to give a horrific look to your mask.

Step 8: Scare Your Friends

After designing and assembling your mask, it’s time to scare your neighbors or flatmates into testing it. Wear it out and go in front of your neighbors without further notice, terrifying them with your cool mask to check how realistic it was made.

Moreover, if you cannot make cool and scary Halloween masks, visit the Glendale Halloween store, one of the best Seasonal Halloween Stores, to buy the latest masks! They will be happy to help you!